For reasons that escape me Cisco have chosen not to release a 64-bit version of the IPSec Cisco VPN Client.

This is a problem for me since I installed the 64-bit version of Windows 7 RC on my Toshiba M750.

To get around this without rebuilding with the 32-bit version I employed Windows 7’s new XP Mode – aka Virtual XP.

First I followed the steps on the download page:

1. Enabled virtualisation extensions in the BIOS.
2. Download and install the Virtual PC Beta.
3. Download Windows XP Mode.

That done I fired up the Virtual Windows XP from my Start Menu:

This loaded up a Virtual Machine already running Windows XP.  I installed the Cisco VPN Client and verified that it could connect to the VPN. 

This is where it gets a little tricky.  At this point I have my Toshiba, which is the host and an XP machine which is a guest.  The XP Guest has a virtual adaptor that leverages the host’s network adaptor and can connect to the remote network.  But the host has not way to connect through the guest to get to the remote network.

For initial testing I created a static route for one of the subnets and pointed it to the IP Address of the guest.  This worked, but it is a bit fiddly as the guest IP address is assigned by DHCP and as such will change depending on where I am.

I wanted something that required a little less work to get connected.  To achieve this I needed to create a virtual adaptor on the Host.  This is done by adding a loopback adapter to the host.

Adding a Loopback Adapter to the Host

In Device Manager right click the root node and select Add Legacy Hardware

On the welcome screen click Next.

Then select Install the hardware that I manually select from a list (Advanced) and then click Next

Scroll down and select Network Adapters and then click Next

Then select Microsoft as the Manufacturer and Microsoft Loopback Adapter and then click Next

On the confirmation screen click Next.  Then when the installation finishes click Finish.

Once this has completed you will find a new network adapter in the Network Connections.

I configured this adapter with a private IP address in a range that I don’t use at home or work. 

Next I added a second Virtual Adapter to the Virtual Windows XP machine and bound this to the new Loopback Adapter.  I assigned a static address to this in the same range as the Loopback adapter.

Because the network I am connecting to uses a number of subnets I wrote two quick CMD scripts.  One adds the routes on the host, the other removes them.

Virtual PC also creates shortcuts for applications installed in the guest on the Start Menu of the host. 

To connect to my VPN I can run this and it hides Virtual Machine’s desktop and the VPN client looks like it is running on the Windows 7 machine.  I then run my script to create the routes and I can work away.  When I disconnect the VPN I run another script to delete the routes again.  Of course I can add shortcuts to all three actions to my desktop to ease the process.  Not quite as clean as installing the client directly on the machine, but it works.

Update: For details of the command scripts see this post.

I’m not jumping on this “I’m a PC” bandwagon.  Why limit myself?  I’m not just a PC…  I’m a tablet pc!

With pen and touch at my disposal I can do so much more than a mere PC. This is especially true with the Windows 7 beta installed.

I took the liberty of fixing one of the logos from the logo pack on the web site. 

Feel free to grab a copy of the image for your own use.

If anyone from Microsoft wants to turn my version into a sticker – make sure you send me a few.

The TIP in Windows 7 has had a lot of work to make it more usable.  I'm finding it to be a really good user experience so far.

This video explores some of the new features that are in the Milestone 3 build (6801) that was released at PDC. 

Windows 7 is much more pen and touch aware than Vista.  And it draws a distinction, too.  When you are using a tablet that supports both pen and touch - such as the Toshiba M750 that I am using - you sometimes get a different depending on how you are interacting with the computer.

The features I demonstrate in this video include:

• The TIP vanishing when you move you pen away from it
• The revamped text correction UI and gestures
• The changes in the On Screen Keyboard when launched with a finger rather than a pen

There may be more that I have not found yet, or that may be added into a future build - who knows!

Click the video below for a glimpse of some of what's new in Windows 7 for Tablet users.

The fabulous folks over at Toshiba have loaned me a brand new M750 to help with my early testing of the Windows 7 pre-beta.  While certainly not the lightest tablet I have used this is a seriously fast workhorse of a tablet.  It really is the whole package.

The unit I got came with:

• Intel® Core™ 2 Duo P8600 (2.4GHz, 1066MHz FSB, 3MB L2 Cache)
• 12.1" WXGA 200NIT CSV Display(1280x800)
• 2GB DDR2 (800MHz)
• 200GB HDD (7200rpm) SATA
• DVD SuperMulti Double/Dual Layer Drive
• 1Gbit LAN + AMT 4.0
• WLAN (802.11a/g/n)

The screen is a Wacom dual mode digitizer, supporting both the active stylus and resistive touch.

Lets have a look at the outside of the device.  As we go through click the images for a larger view.

Down the left hand side we have

A - Venting.  This blows out a little air but not much and not very warm.

B - Lock port

C - A combination eSATA or powered USB port.  This particular USB port is suppose to be able to charge your USB devices while the tablet is asleep, but I've not put that to the test yet.

D - A normal USB port

E - PCMCIA slot

The front bezel has...

A - a plathora of indicator lights - including ones for optional components such as a second battery or a 3G WWAN radio.

B - Hardware switch for the radios.  This is a nice touch.  I never remember to turn my wireless off before I get on a plane :)

C - IEEE1394 port.

D,E - Headphone and mic jacks

F - hard to see in the picture but a volume control wheel.

Down the right side and we have

A - The stylus dock.

B - A multi card reader

C - A slimline DVD dual layer recorder

D - A modem port (I can't remember the last time I used a modem - seems like a waste of space to me!)

The back side is fairly sparten.

A - Another USB port.

B - VGA Output

C - Power input

D - Gigabit Ethernet port

The top of the screen sports an inbuilt web cam and microphone.

There are also a host of buttons at the bottom of the screen - or on the front bezel when in slate mode.

And a fingerprint reader on the other end of the same edge, which is also well placed for ease of access in both laptop mode and slate mode.

Speaking of slate mode the M750 has the same locking hinge that we first saw on the R400 and have since seen on the M700 as well.  This eliminates the floppy head that some other convertibles suffer from.  Basically you can only rotate the screen when it is roughly 90 degrees to the base.  The rest of the time the bottom corners lock into these latches on the corner of the base.

Another nice feature - no doubt aimed at eliminating a common cause of breakages - are the indicator arrows by the hinge that tell you which way to twist the screen.  These are located front and back of the hinge.  The former is visible when in laptop mode and the latter when in slate mode.

Another great feature the M750 shares with many of its predecessors is the emergency stylus.  I used it a couple of time when I had a M400 and wished for it many times with some of my other tablets.  Basically if you flip the unit over there is a panel by the docking station connector.

To open this you push a pen in the hole on the right end (ironically - if you have lost your main stylus) and pull the other end to slide the cover to the left.  You can then flip the cover over and - hey presto - a little mini stylus clipped into the lid!  Very cool.  Note there is even a little button on it - this is a real active digitizer stylus.

Over all I am pretty impressed so far.  The M750 is a really nice device to work with.  I have put Windows 7 on it and it runs very fast and so far pretty stable.  I'll have more to say on that as I get into it.