On this page
Recent Posts on Technozone
This site
Calendar
<February 2006>
SunMonTueWedThuFriSat
2930311234
567891011
12131415161718
19202122232425
2627281234
567891011
Archives
Categories
Microsoft MVP
Blogroll OPML
Disclaimer

Powered by: newtelligence dasBlog 2.0.7226.0

The opinions expressed herein are my own personal opinions and do not represent my employer's view in any way.

Send mail to the author(s) E-mail

Theme design by Craig Pringle

Based on the essence theme by Jelle Druyts

BlogPad Update#
Last night I integrated the new RTF parser into BlogPad and built myself a new version for testing. Seems a bit flakey but it sometimes works. when it does the parser supports basic formatting and hyperlinks. I'm getting there :)
Wednesday, March 01, 2006 7:58:21 AM (AUS Eastern Standard Time, UTC+10:00) #   
Comments [0]  | 

 

More on the M400 #
Warner Crocker points out that there is another person posting details of the Toshiba M400.
"Tablet PC Buzz forum member rubberdemon has taken delivery of his Toshiba M400 Tablet PC and is filing reports about his experiences on the Buzz."
Unlike me he has actually purchased it and gets to keep it
Tuesday, February 28, 2006 7:04:58 PM (AUS Eastern Standard Time, UTC+10:00) #   
Comments [0]  | 

 

M400 Battery Life Report#

For most of the last few days I have been tinkering with the M400 for short periods and then charging it up again - without running it right down. 

As a last hurrah before handing the demo unit back tomorrow I decided to get an idea of the battery life.  Not having much time left with the device I decided to go for the worst case.  I cranked the brightness up to full, turned wireless on and started browsing away.  This got me a bit over 3 hours continuous use.  So at worst with the M400 you can expect 3 hours running time. Turning down the brightness and tweaking the power settings using the Toshiba Power Management tool I would expect that you could stretch this to over 4(have not tried it).  This the extended battery I suspect (totally untested) you could get a full day.

Here's the power save settings I used for the test...

 

Sunday, February 26, 2006 7:28:18 PM (AUS Eastern Standard Time, UTC+10:00) #   
Comments [2]  | 

 

Installing Vista on a Toshiba M400 - Take 3#

After trying the inplace upgrade option for Windows Vista build 5308 I can confirm that the upgrade does process does work, though as previously noted it takes a bit longer.

After the upgrade I was still without Areo Glass effects and I did not manage to resolve this.  Indeed when Vista first started I was greeted by a stunning 640x480 display at 256 colours because Vista had loaded a generic "Standard VGA" driver.  This is the whole screen (at 66% of orignial size)

Fortunately I was able to change the resolution back to 1280x1024, 32 bit colour.  That looks lots better.

Additionally the fingerprint driver, bluetooth, Wi-fi and Toshiba power management would not run after the upgrade.

After a tip-off from Warner Crocker that Windows Update had some driver updates for build 5308 retired to the study and I plugged in a network cable (boy - that took me back!!).  Windows Update contained two updated drivers - one for the wireless which errored when it tried to install and a new version of the "Standard VGA" driver - which still does not give me glass.  As there was no WDDM driver for the Intel 945 Express chipset I cannot stress enough - this does not mean the M400 will not run glass.  At no time did I have a WDDM driver.

On the whole I have enjoyed my days with the M400.  It is a nice machine and handles itself well - despite my demo unit only having 512 MB of RAM installed.  It will be hard handing it back tomorrow.

I've reverted it back to factory defaults and I'm using it now for my evening's blogging to get an idea of the battery life.  I'll post something about that soon.

Sunday, February 26, 2006 5:48:56 PM (AUS Eastern Standard Time, UTC+10:00) #   
Comments [4]  | 

 

Artwork from the pen of Sylvie#

My nearly-fifteen-month-old daughter had some tablet time yesterday.  She drew this stunning creation in ArtRage.  I did help her change colours a now and then, but conceptually it is all her.

Already it is clear to me that she has more artistic ability than I do ;-)

Sunday, February 26, 2006 5:27:33 PM (AUS Eastern Standard Time, UTC+10:00) #   
Comments [0]  | 

 

GottaBeMobile.com Launched!#

Two Tablet PC MVPs (and top chaps) have joined forces on a new mobility focused blog and community site.

Rob Bushway and Dennis Rice today officially launched GottaBeMobile.com.  Rob has long been an active and respected Tablet PC blogger and Dennis is the managing editor of TablePCBuzz.com so they should make a great duo!

If you were already subscribed to Rob Bushway's CutMeLoose blog then you don't need to do anything as the main feed is the same.  If you weren't then head over to GottaBeMobile.com or just take my word for it and subscribe to this feed.

From Rob and Dennis:

"Check out our new InkShows, news articles by ISV and OEM categories, our hsoftware list, and of course our editorials. Coming soon is an interactive hardware comparision matrix - something that is badly needed in the tablet pc space.

So, enjoy your visit, check out all the new stuff, and come back often."

Sunday, February 26, 2006 11:48:54 AM (AUS Eastern Standard Time, UTC+10:00) #   
Comments [0]  | 

 

Toshiba M400: Starting in-place upgrade to Vista build 5308#

To be honest this is the second time I've started this.  I learned this afternoon that the inplace upgrade takes much longer than the clean install.  I started off an upgrade late in the afternoon at work and it had not yet completed when I had to leave the office.  I closed the lid and this seriously broke the install :)  I restored back to factory defaults again and now I'm kicking off the inplace upgrade. 

After entering my product key and selecting upgrade the installation program performs a compatiblity check.  This is the output of the check on the M400 (love the TBD - but hey, it is a beta):

Update after installing Windows

Install new versions of these programs

  • Bluetooth ACPI from TOSHIBA
  • Toshiba BT Port (COM15)
  • Toshiba BT Port (COM16)
  • Toshiba BT Port (COM17)
  • Toshiba BT Port (COM18)
  • Toshiba BT Port (COM19)
  • Toshiba BT Port (COM20)
  • Toshiba BT Port (COM21)
  • Toshiba BT Port (COM6)
  • Toshiba BT Port (COM7)
  • Bluetooth RFHID from TOSHIBA
  • Bluetooth RFBNEP from TOSHIBA
  • Bluetooth Personal Area Network from TOSHIBA
  • Bluetooth RFBUS from TOSHIBA
  • Intel(R) PRO/1000 PL Network Connection
  • Bluetooth USB Controller-5 from TOSHIBA
  • 1394 Net Adapter

    Where do I get new versions?

    TBD

  • Friday, February 24, 2006 7:16:15 PM (AUS Eastern Standard Time, UTC+10:00) #   
    Comments [3]  | 

     

    Interesting security features of the Toshiba M400#

    In a comment on my review of the Toshiba M400 David asked if the M400 includes the accelerometer as his M200 does.

    Indeed it does and this forms part of one of the interesting security features available in the M400.

    The accelerometer is leveraged for a solution called Advanced Instant Security.  When activated AIS locks the machine.  If it is moved while it is locked it causes an alarm to sound.  This M200 had the same feature.

    This is not the only interesting security funciton in the M400.  In addition to the biometric fingerprint reader - which can be used to authenticate for both the BIOS password and the HDD password and to authenticate to Windows the M400 supports these additional authentication methods.

    • Wireless Key - will authenticate you if your bluetooth enabled mobile phone is within bluetooth range.
    • User Token - create a virual token on an SD Card.  This is used in conjunction with the BIOS and HDD passwords.  If the SD Card is in the slot then the this is used to authenticate to the BIOS and HDD instead of the password.

    There are some things to be aware of with the User Token - you would want to be really careful with that SD card.  If you are just going to leave it in the SD Card slot then it is pretty useless.  Additionally it is no more secure than a password - if the card is missing you can just enter the password(s) and boot the machine.

    There are several things to bear in mind if you are thinking about using the wireless key.  Indeed when configuring the wireless key Toshiba provides the following Important Informaiton:

    "1. Should the cellular phone you registered during setup get misplaced, run out of power, suffer damage, be destroyed, or otherwise be adversely affected, you will not be able to log on to your PC. Be especially careful to avoid such occurrences.

    2. Should you be unable to use your cellular phone for any of the reasons given above, you will still be able to log on to your PC by asking the administrator for the BIOS supervisor password (a unique password that enables a login to be performed without a cellular phone). However, if you can't use your cellular phone where you are, and need to ask assistance from the administrator, be especially careful to ensure that persons nearby do not secretly view the BIOS supervisor password. Anyone who learns the password will be able to gain access to all of the PCs (provided that the administrator has not configured each PC with a unique password). Exercise the appropriate discretion when making such requests of the administrator.

    3. Turning your cellular phone on in locations where it is not permitted to do so (such as in aircraft or hospitals) may be punishable by law. Take care not to operate your cellular phone in such areas.

    4. If you are holding a cellular phone that has been registered to a PC using this software and happen to be standing near a PC (within approximately ten meters, though this distance will depend on how clearly the radio waves can be transmitted), in certain configurations it is possible that someone of malicious intent may be able to turn on your PC and successfully log on to it without entering any password at all, without your having sanctioned such an action. Should there be any risk that someone might be able to access the PC, you should either disable the function in the utility or disable your cellular phone's Bluetooth(TM) function.

    5. If you move away from where you've been sitting and, during your absence, leave a cellular phone that has been registered to your PC with this software utility near the PC, others will be able to access your computer's contents. Please exercise due care in such circumstances.

    6. Your PC starts to search for cellular phones immediately after it has been switched on. Therefore, even if you turn your computer off while away from it, as long as you are within the Bluetooth(TM) transmission range a malicious person will be able to secretly turn it on and operate it without having to enter a password. In order to prevent this from happening, it is recommended that the Bluetooth(TM) function of your cellular phone be disabled until you return.

    7. If both your PC and the cellular phone registered to your PC using this software get stolen or accidentally left somewhere, your computer will be accessible to anyone.

    8. Using your cellular phone as a key to log on to a PC does not provide extra security. Only use this function once you have thoroughly understood what it does. If you have any doubts about configuring this function or Bluetooth(TM), or about the use of cellular phones, it is recommended that the function not be used. If you wish to make your PC secure, disable the function.

    9. Requiring a BIOS password to be entered as well as using a Bluetooth(TM) cellular phone will make your PC more secure than if either of these methods is used alone; however, the PC can still be stolen, its hard disk drive can be removed, or other means can be used to access the information stored within it. It is accordingly urged that you discuss robust measures such as encryption to handle especially critical data.

    10. TOSHIBA shall accept no responsibility whatsoever for any theft of data or other adverse events, whether or not they result from the software or the functions as described above. "

    Friday, February 24, 2006 6:56:08 PM (AUS Eastern Standard Time, UTC+10:00) #   
    Comments [3]  | 

     

    M400 Extended Battery Details#

    In my review of the M400 I noted that the front bevel has indicators for two batteries.  This prompted Fred Beiderbecke to ask in a comment:

    "Can this guy take two batteries?  I thought that optical drive bay could only be used for an additional hard drive."

    Indeed the optical drive bay can take an additional hard drive (which can be hardware RAIDed) but not a battery.

    The external battery is apparently wedge shapped and attaches to the base of the unit.  Below is the page from the M400 manual with a diagram that should give you a better idea of how this will look.

    This will mean that if the unit is on your desk the back will be propped up in laptop mode.  I don't think that this will make much of a difference to usability in that mode.  I do wonder if it will make the tablet harder to hold in your lap in slate mode though.  However - while it may be harder to hold I also suspect that if you are writing at a table the battery will put the slate on quite a nice writing angle in landscape view. 

    Friday, February 24, 2006 6:18:58 PM (AUS Eastern Standard Time, UTC+10:00) #   
    Comments [2]  | 

     

    Vista on the M400 - Take 2#

    I managed to install Vista build 5308 on the M400.  The install was very smooth and fast - however 5308 does not include the appropriate driver.  Vista reported that it was an Unknown Video Adapter and used a generic Video driver.  This gave me a max resolution of 1280x1024 but no Areo Glass.

    Since this build also includes the upgrade option - I decided to restore the factory image and try the inplace upgrade - just for a laugh.  This is running now so stay tuned for Vista on the M400 take 3.  (If I can get updated drivers there will be a take 4 as well)   :)

    Friday, February 24, 2006 1:21:23 PM (AUS Eastern Standard Time, UTC+10:00) #   
    Comments [4]  | 

     

    Installing Vista build 5308 on the M400#

    I've got the new February CTP build of Vista and I am in the process of installing it on the M400 that Toshiba NZ have loaned me

    The first thing I noticed is that this build is the first to offer an upgrade option (from Windows XP SP2 anyway).  I've opted to do a clean install in the first instance, though I may restore factory defaults again and try an upgrade after that - now that I have the unit unitl Monday.

    Thursday, February 23, 2006 6:41:09 PM (AUS Eastern Standard Time, UTC+10:00) #   
    Comments [3]  | 

     

    A reprieve!#

    Toashiba have kindly extended my loan of the M400 until Monday morning.  I’m getting the build 5308 of Vista tonight and I’ll get it on the M400 tomorrow or over the weekend.  Huge thanks to Toshiba NZ for your continued support!

    Thursday, February 23, 2006 1:40:46 PM (AUS Eastern Standard Time, UTC+10:00) #   
    Comments [0]  | 

     

    Vista on the M400 - Take 1#
    Well I managed to install the December CTP build of Vista (build 5270) on the Toshiba M400 I've borrowed.  It installed fine but with the display drivers in 5270 there is no glass.  I tried to force glass by disabling the hardware check in the registry - as blogged by Colin Walker a while ago but the result was a black screen with a flickering mouse cursor that appeared to be cycling though display resolutions in a loop. 
    Please Note: This does not mean that Glass will not work on the M400 - just that it does not work with the drivers in that build.
    I booted into safe mode and removed the reg hack (while MSN chatting with Warner Crocker actually) and rebooted back into Vista.  I tried to install the Windows XP video drivers, but they would not install.
    I am not defeated - I'll try the new build... 
    Due to everyone else trying to download the new Vista build I can't even connect to the connect.Microsoft.com web site (ironic isn't it)
    I am not defeated - I've contacted a colleage at Microsoft who is burning me a DVD that I'll pick up off him tonight at the Windows Mobile User Group Meeting.
    As a parallel stream I'm trying to extend my loan of the M400 through local contacts and trying to get updated drivers through global contacts.
    I'll say it again - stay tuned...
    Thursday, February 23, 2006 12:56:58 PM (AUS Eastern Standard Time, UTC+10:00) #   
    Comments [0]  | 

     

    Recovery options for the Toshiba M400#

    Before I go and install Vista on my borrowed Toshiba M400 I wanted to be sure that I could get it back to factory defaults before I hand it back.  To this end I thought I would create a set of recovery DVDs for the M400 before I started.

    This process is very easy.  There is an icon on the desktop:

    Clicking this launches a nice simple wizard that lets you select your media type (CD or DVD).  You just put the first disc in and click Burn.  When each disc completes it is verified, then you are prompted to insert the next disc.

    Now if you ever create recovery media I strongly suggest you test that you can boot off it.  To this end I changed the boot order in the BIOS and put the first disc in.  It booted into Windows.  I then used the F12 method to activate the boot menu and selected CD.  No dice – did not even light up the activity light on the drive.  Nothing wrong with the media – I could boot another machine off it.  The problem is actually with the M400.  It would seem that you can’t boot off (at least) some external USB optical drives.  I tried it with two different drives and could not get it boot off either optical drive.

    It was at this point that I tried picked up the manual and discovered the other method to restore factory defaults…  The recovery files are already on the disc in a hidden partition.  To access this you boot the device while holding down zero (0).  The machine will boot off the hidden partition and you can restore the M400 to factory defaults.  Very cool.

    Safe in the knowledge that I could get it back – I rebooted into Windows, put the Vista DVD in (can’t boot off it – remember) and started off the install.  Stay Tuned.

    Thursday, February 23, 2006 10:12:40 AM (AUS Eastern Standard Time, UTC+10:00) #   
    Comments [0]  | 

     

    Hands on Review of the M400#

    I was lucky enough to borrow a Toshiba M400 from Toshiba New Zealand for a couple of days.  I picked it up today before lunch when I was passing by.  I had quite a busy day today so the thing sat on my desk all day largely unmolested.  Talk about torment!

     

    Conclusion

    Overall I am very pleased with the M400.  The device is pleasant to look at and the design is very functional.  Some of the value add software is excellent.  Also – and very importantly – Toshiba clearly listened to it’s customers when they griped about the brightness and viewing angle on the M200 because the problem is well and truly gone on the M400.  With the Dual Core processor the M400 should be able to make Vista race along.  I might give that a try tomorrow J

    Wednesday, February 22, 2006 8:52:16 PM (AUS Eastern Standard Time, UTC+10:00) #   
    Comments [14]  | 

     

    Hands on Review of the M400#

    I was lucky enough to borrow a Toshiba M400 from Toshiba New Zealand for a couple of days.  I picked it up today before lunch when I was passing by.  I had quite a busy day today so the thing sat on my desk all day largely unmolested.  Talk about torment!

     

    Conclusion

    Overall I am very pleased with the M400.  The device is pleasant to look at and the design is very functional.  Some of the value add software is excellent.  Also – and very importantly – Toshiba clearly listened to it’s customers when they griped about the brightness and viewing angle on the M200 because the problem is well and truly gone on the M400.  With the Dual Core processor the M400 should be able to make Vista race along.  I might give that a try tomorrow J

    Wednesday, February 22, 2006 8:51:18 PM (AUS Eastern Standard Time, UTC+10:00) #   
    Comments [3]  | 

     

    Got something cool...#

    I just picked something really cool.  I've only got my hands on it for a couple of days but I'll be going over it with a fine tooth comb tonight and posting a full review.

    I'll give you a hint - It starts with M and ends in 400

    Here's the box on my desk....

     

    Wednesday, February 22, 2006 8:53:23 AM (AUS Eastern Standard Time, UTC+10:00) #   
    Comments [2]  | 

     

    Total Workday Control Arrives!#

    Yay – Michael Linenberger’s book Total Workday Control: The Eight Best Practices of Task and Email Management arrived from Amazon today.  I’m still waiting on Seize the Work Day: Using the Tablet PC to Take Total Control of Your Work and Meeting Day.  I decided to split the order because the latter was delayed by another month!  Need I point out that is far cry from the instant gratification I would have experienced had the two books been available in e-book format – authors, publishers read my open letter explaining why you should release books in e-book format.

    Can’t wait to read it – just as soon as I finish Naked Conversations.

    Tuesday, February 21, 2006 12:09:52 PM (AUS Eastern Standard Time, UTC+10:00) #   
    Comments [0]  | 

     

    Code translations...#

    I posted last night that I had made some significant progress on Blogpad.  Specifically I made huge inroads into a problem that I have been struggling with for a while - converting RTF markup into HTML.

    Last night I decided to look again for an example where someone had done something similar.  And this time I found something! 

    I stumbled across this article by sgoliver on The Code Project that uses C# to parse RTF anc can convert it to HTML.  The first problem is that I don't know C# - all the programing I've done to date has been in varients of VB.  When I downloaded the example project I encounted the second problem.  All the variable names and comments are in Spanish!

    I built the demo application and gave it a try and it worked.  So what I had was code that worked - but that I really didn't understand.

    Not to let a little thing like that stop me I set about trying to turn it into something I did understand without breaking it. 

    My first step was to try to turn C# into VB.Net.  As with many things in life Google had the answer.  A quick search for "C# VB.net Converter" yelided several results.  I tried a few and got the best result with this C# to VB.Net converter on Developer Fussion.

    Now I'm working through the code and fixing up a few things the converter did not get quite right.  Next I'll go through and use Babel Fish to translate the Spanish variable names into English so I can better understand how it works.

    Monday, February 20, 2006 7:07:22 AM (AUS Eastern Standard Time, UTC+10:00) #   
    Comments [2]  | 

     

    BlogPad back in business...#

    For the last couple of weeks I have not had much time for blogging and none at all for working on BlogPad.  Tonight I decided to spend some time coding BlogPad and made huge strides.  I've got a partially functional RTF to HTML converter - which is a big win.

    Amazing how putting something aside for a couple of weeks can give you a whole new perspective.  :)

    Sunday, February 19, 2006 7:38:56 PM (AUS Eastern Standard Time, UTC+10:00) #   
    Comments [0]  | 

     

    ActiveWords Rocks the Tablet PC#

    I've recorded a short screen cast showing ActiveWords at work on a tablet.

    Included in the video:

    • Substituting text
    • Correcting text using the free Misspellings and Capitalisations applications available from the ActiveWords website.
    • Launching applications
    • Opening documents
    • Connecting to EVDO using an ActiveWord trigger
    • Opening web sites
    • Navigating to folders
    • Replacing windows key shortcuts with ActiveWords

    Check out the video here:

    ActiveWordsDemo.wmv (7MB)

    If you have not tried ActiveWords I suggest you check out the free trial.

    Saturday, February 18, 2006 8:32:49 PM (AUS Eastern Standard Time, UTC+10:00) #   
    Comments [2]  | 

     

    All content © 2012, Craig Pringle